Langsung ke konten utama

Guide to Choose a Remote Car Starter

Buying a remote car starter can be an overwhelming experience if you don’t know what you’re looking for. How should you choose a remote car starter? Look for the features that are most important to you. Would you like to be able to start a vehicle that is usually parked across the street? Do you live in an extremely cold climate? Are you interested in a starter system that includes keyless entry? These are all important questions you’ll need to address.

Know Your Car's Requirements


    1
    Read the warranty information on both your vehicle and the remote starter system.
        Many companies will guarantee the remote starter for as long as you own the vehicle. While the system is under a warranty, the remote itself is rarely warranted for more than a year or two, so find out what the remote replacement cost will be.

    2
    Check with your current vehicle warranty information. A dealer cannot void a warranty if equipment is added. It is against the law. The dealer can however, void the warrant if the installation of the equipment causes any damage to the vehicle. A professional remote starter company and shop should be used to avoid any damage and void of your warranty.


Features to Look For


    1
    Watch for a transmitter range when you choose a remote car starter.
        Don’t buy a starter with a shorter range than you need.
        Consider the trips to the mall, movies and restaurants when choosing a range. You may find you wish you had gone with a larger minimum range for these occasions.

    2
    Keep an eye out for information about the engine speed sensing mechanism of the remote car starter.
        The monitor will watch your engine’s RPMs to avoid damaging your vehicle if the engine has problems when starting.
        The RPM sensor will also tell the starter that the car has actually not started on a very cold day and try to restart it again. Without the sensor, your starter your vehicle will be cold when you get there.

    3
    Find a remote car starter with a cutoff safety switch under the hood.
        It’s very important to have a cutoff switch installed under the hood so anytime the hood is open the starter can be manually turned off to avoid injury when working on the vehicle.

    4
    Consider installing keyless entry with your starter if your vehicle doesn’t have it. If you have manufacturer keyless entry, you may consider adding the remote starter keyless entry feature with your remote starter. The starter usually has a much wider range making it a lot easier to lock or unlock your doors from farther away.

    5
    Find a remote car starter system that offers a security system as part of the installation process. The security system can even be added to vehicles that already have manufacturer security.

    6
    Add a few other remote car starter features that may not come standard on every unit.
        Heated seats are an option that can be put in with the car starter. Not only will your vehicle be warm on a cold winter day, your seat will be nice and comfortable too.
        Add rear window defrost so your windows are thawed and ready to go without having to wait for the heat of the car to do it or scrape them yourself.
        Look for anti-grind features that save your engine from a mistaken key turn once in your vehicle. Even if you have your starter for years, the tendency to get in and turn the key is still there. The anti-grind feature will save your starter on those days when you forget your vehicle is on and try to turn the key.
        The car alarm for finding a vehicle is another easy addition to a car starter unit. The horn will sound with a click of a button so you can find your vehicle in large parking lots.


Ensuring that You're Covered


    1
    Make sure to find a system that is perfect for your needs and has life-time warranty. Several systems now come with a 2 way remote which will have longer range and will actually confirm that your car started on your remote.

Komentar

Postingan populer dari blog ini

guide to Power a Car Amplifier Using a Computer Power Supply

If you recently switched vehicles and have no room for that big subwoofer in your new car, don't give it or throw it away. Keep it. Use it inside or outside your house by having it powered by a computer power supply.     1     Find the power pin. In the power supply packaging (if bought new) there should be a pinout diagram. Look for the pin that says something along the lines of “Power on”, "PS OK" or other key words that indicates a on signal. It will be on the biggest pigtail.         99% of the time it will be a green wire on new power supplies, but for older power supply “10+ years” the wire could be yellow or purple. If your power supply did not come with a pinout diagram, check the manufacturer website for a pinout diagram.     2     Cut the power wire from the pin and strip the end.     3     Cut the ground wire from the pin and str...

Guide to Install a Tachometer

A tachometer is used to indicate the revolutions per minute (RPM) being performed by a car engine. Most cars with automatic transmissions are not equipped with a tachometer, since a tachometer is mostly used to indicate visually when it's time to shift gears. If your car doesn't have one, it's a good way to keep an eye on your engine speed. See Step 1 for more information. Getting Started     1     Get a tachometer and splicing connectors. You can either buy a tachometer new, which usually run somewhere between $30 and $50, or salvage on old one for relatively cheap and install it into your car.         The only other specialty item you'll need to complete the job is a package of quick-splice connectors, which are usually only a few dollars at the auto part store. The wires are about 16-18 gauge usually, so get connectors of the appropriate size.     2     Adjust the tachometer for the num...

Guide to Install a CB Radio in a Jeep Liberty

CB radios are recommended for a lot of off-road groups, as well as traditional uses. There are many ways to install this; the way presented here offers a cheap and effective way to do this if you are pressed for time and money, and use your CB radio infrequently.     1     Select a CB radio. For this exercise, the smallest Cobra was selected. It sells for about USD$35 at Walmart Online. You will also probably find it in local shops from $50-$60. There are other radios from Midland, Radioshack with similar dimensions. (Prices as at Sept 2007, feel free to update.)     2     Select a suitable location. A good location would be under the AC controls alongside of the cigarette lighter. When taking the plastic off you’ll see that you’d have to cut into the wall behind the plastic, it’s not deep enough to fit the radio. It’s possible but not quick, and the mic cord would be in the way of the transfer case shifter. Other ideas: ...